In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques that you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the home, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so that you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Make sure that it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it dog facial mask might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are flat and make certain it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you will need to do some sanding to be sure that it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.